Mercedes Key Reprogramming

These instructions are applicable to the flip type rectangular keys – the "bladeless keys" can only be reprogrammed using diagnostic equipment & can NOT be used on any vehicle other than the one that it was supplied with.
A CLASS
Procedure
1. Point the key at the vehicle & press the lock/unlock button twice.
2. Turn the ignition switch to position II within 30 seconds.
C CLASS (1993-1997), E CLASS (1995-1997), SLK (1996-)
Procedure
1. Point the remote control at the receiver – this should be located in the driver’s door handle or next to the boot lock button.
2. Press the lock/unlock button.
3. Within 30 seconds manually lock or unlock the vehicle using the passenger’s door lock or the boot lock.
Alternative method
Procedure
1. Point the remote control at the receiver – this should be located in the driver’s door handle or next to the boot lock button.
2. Press the lock/unlock button.
3. Within 30 seconds, switch the ignition ON.
Alternative method
Procedure
1. Point the remote control at the receiver – this should be located in the driver’s door handle or next to the boot lock button.
2. Press the lock/unlock button.
3. Within 30 seconds, turn the ignition switch to position II.
M CLASS
Procedure
1.Turn the key to position 2 in the ignition lock. Then turn the key to position 0 in the ignition lock & remove.
2. Within 60 seconds, press & hold the LOCK button.
3. While holding the LOCK button, press the UNLOCK button 5 times.
4. Check all functions.
5. If it still does not operate correctly, repeat the procedure.

Read More

Replacement Remote Flip Key Button Benz Mercedes

Mercedes 3 button flip key fob REPAIR SERVICE for damaged faulty keys in Vehicle Parts & Accessories, Car Accessories, Security and
Replacement Flip 1 Button Remote Key Shell Case Fob For Benz Mercedes 1984-2004

Read More

Mahindra XUV Flip Key Repair

We got a Mahindra XUV Flip Key for repair. Its spring was damaged. When we opened the key, we found that it has different spring system than what we normally get in other Flip Keys. Both the legs of spring are toward inside of spring (normally in other keys, one leg is toward inside and one toward outside). Moreover the direction of spring coil is opposite to what you get in other Flip Keys. This change is due to entirely different spring mechanism what we normally get in other Flip Keys.

Read More

Toyota Fortuner Key Matching (Manual Procedure)

Common initial steps for all procedures (need to perform before Add / rewrite / Synchronization / Forbid)

•     All doors locked and unlocked
•     Insert the text in ignition key cylinder.
•     Wait 5 seconds
•     Turning On & Off 4 times and ignition switched on fifth time
•     Driver door open and close 1 time
•     On Off
•     Answer Back (Horn) will

 Add

•     Driver door open and close 1 time
•     Ignition on and on Off
•     Answer Back (Horn) will
•     Press the lock and unlock button together
•     Press any button to lock or unlock
•     Answer Back (door lock and unlock) will happen
•     Remove the key and open drivers

New version

•     Driver door open and close two time
•     Ignition on and on Off
•     Answer Back (Horn) will
•     Press the lock and unlock button together
•     Press any button to lock or unlock
•     Answer Back (door lock and unlock) will happen
•     Remove the key and open drivers

Synchronization

•     Driver door open and close 3 times
•     Ignition on and on Off
•     Answer Back (Horn) will
•     Remove the key and open drivers
•     Press any button to lock or unlock

Ban

•     Driver door open and close four time
•     Ignition on and on Off
•     Answer Back (Horn) will
•     Remove the key and open drivers
•     Press any button to lock or unlock

Read More